Low Alloyed Tool Steel Plate, Mat Number 1.2063

Model Number: ZXL057 Brand Name: Baosteel, TISCO Key Specifications/Special Features: Descriptions:Medium alloy cold work steel, oil hardening, performances slightly inferior to those of our grade meriloex, moderate deep hardening properties, good toughnessApplications:Small to medium size blanking and punching dies, shear blades, thread cutting tools, reamers, gauges and similar measuring instrumentsChemical composition (in weight%):C 1.50
Si 0.23
Mn 0.60
Cr 1.40
Physical properties (average values) at ambient temperature:
Modulus of elasticity [10³xN/mm²]: 210
Density [g/cm³]: 7.80
Soft annealing:
Heat to 740 to 760°C, cool slowly in furnace, this will produce a maximum brinell hardness of 230
Stress relieving:
Stress relieving to remove machining stresses should be carried out by heating to approximately 650°C, holding for 1-2 hours at heat, followed by air cooling, this operation is performed to reduce distortion during heat treatment
Hardening:
Harden from temperature of 830 to 860°Cfollowed by oil quenching (interrupt at approximately 150°C) Hardness after quenching is 64 HRC
Forging:
Hot forming temperature: 1050 to 850°C

Specifications:
Grade:mat number 1.2063
Standards: DIN, GB, AISI
Length: 1500-6000mm
Width: 100-1250mm
Thickness: 0.3-200mm
Certification: ISO
Technical treatment: cold-rolled and hot rolled

Packing and delivery:
Packing: standard export seaworthy packing or as customer’s requirements
Delivery details: 7-20 days after received deposit of T/T